PR/X2 4" DOUBLE CARBIDE

• 7/16" Carbon steel host bar, with a flat top to prevent "bar roll" during aggressive cornering
• Carbides are made of yg13 tungsten that provides the ultimate tensile strength for extreme durability and hardness to reduce chipping and increase longevity
• The 90 degree angle of carbide into the pocket of our runners makes for very large cross sections compared to other designs
• 1" Carbide segments allow for flex in ski without compromising carbide adhesion
• Engineered and test fitted to precisely fit your ski for easy install
• Chamfered ends to reduce catching when backing up and unloading
• Extended studs to allow for ski skins
• All necessary fastening nyloc nuts included
• All carbides and wearbars are coated in a black, rust preventative finish
*Some models may require drilling

DEFENDER SERIES HARDWELD:

• Features hard weld on contact area of host bar, giving it more depth to increase longevity
• Less damaging to concrete and asphalt surfaces

RIPPER FOUR75 CARBIDES:

• Features 4" of 75 degree tungsten carbide
• This carbide is less aggressive and has a longer wear period
• Hard welded in the front and back of the carbide for extended durability
• Recommended for use with lightly studded tracks or no studs

SLASHER SIX60 CARBIDES:

• Features 6" of 60 degree tungsten carbide
• Designed for improved handling and performance cornering
• 1.5" Carbide wear pads in front and back with hardweld in between
• Recommended for riders with a studded track

X2 FOUR60 / X2 SIX60 DUAL STYLE CARBIDES:

• Features two either 4" or 6" 60 degree carbides
• Dual carbide style creates a new groove in the trail helping to eliminate darting
• Provides extreme control, stability, and handling
• Hardwelded in front and back for extended durability

(this is for the profile images at the top rh side of the intro page, needs to be with those 2 images showing the black bar w/ grey inserts,  refer to intro page on SP1 RUNNERS which should be the very first page of the runners that describes each runner.)

(this is for the top image)

Many competitors
use a design that is
mounted very shallow
in the host bar.

(this is for the bottom image)

Our diamond
shaped carbides
are set deeper into
the host bar giving
it more surface
contact adhesion.
This will make it less
susceptible to side
impact failure from
rocks or gravel.