INNER FORK BUSHING 48MM PTFE ON THE EXTERNAL SIDE

Fork Seal Kit

Low friction fork seal solution which improves feel and comfort,

while increasing the reliability through better dirt exclusion.

• 20% Reduction of friction
• Improved feel and smoothness
• Increased life and performance
• Enhanced water and dirt protection
• Reduced wear and air suction
• M X A  5 Star Rated "The added performance gained by the reduction of stiction is icing on the cake. The cake itself is doubling the fork seal life"

H-D Seal Kit

This kit is recommended for extreme mud riding conditions. To safeguard the performance of the fork, SKF recommends replacing oil seal and dirt scraper at the same time. A worn dirt scraper can heavily contribute to reduce the oil seal life time and effectiveness in operation

Dual Compound Seal Kit

Totally NEW DUAL COMPOUND:  Innovative co-molding production technology which is patent pending by SKF. The rubber compounds are new and different from our previous aftermarket green seals. New metal insert and totally re-designed scraping and oil sealing lips. Open wound DS spring: this is not just a stretched std. spring but a dedicated fork seal spring with open winding. Benefits: constant force over time with no accumulation of debris between coils. Improved followability capability of the seals to conform to fork tube deflection. Will not dislodge during pressure washing

• Minimum friction for enhanced riding comfort and compliance
• Improved contamination exclusion
• Stable performance over time
• Extended sealing capability
• Improved durability

SKF PTFE composite fork bushings are the maintenance-free solution in demanding applications such as front fork motorcycle suspensions.

SKF fork bushings combine the mechanical strength of steel with the low friction of a PTFE-based self-lubricating sliding layer. The intermediate thin bronze layer creates a strong bond between the backing and sliding surfaces, and improves the dissipation of heat generated during operation. To protect the bearings from corrosion, the steel backing is copper-plated.

The PTFE-based sliding surface permits smooth, low-friction operation for a plush riding feeling. During a short run phase, there will be some transfer of PTFE material from the sliding contact surface to the counter face. After transfer, the characteristic low friction and wear properties of these bushings will be achieved.

Benefits of the fork bushings are:

• maintenance-free operation

• low frictional properties under side load

• high load carrying capacity

• stability at wide operating temperatures

• small operating clearance for improved guidance

• dimensions marking for quick product identification

***NOTE: KIT IS ONE FORK SEAL ONE WIPER MUST ORDER 2EA FOR COMPLETE FORK REBUILD

***NOTE: BUSHINGS ARE SOLD AS EACH

• Note: Bushings are sold as each
• Maintenance-free operation
• Low frictional properties under side load
• High load carrying capacity
• Stability at wide operating temperatures
• Small operating clearance for improved guidance
• Dimensions marking for quick product identification