{"title":"IGNITION - PVL","description":"","products":[{"product_id":"malossi-mhr-team-ii-inner-rotor-ignition-pvl-new-july-2019","title":"Malossi Inner Rotor Ignition - PVL (SMALL TAPER)","description":"\u003cb\u003e*** REPLACES PART# 5518269 ****\u003c\/b\u003e\u003cbr\u003e \u003cbr\u003e\n\u003cp text-align=\"justify\"\u003eManages multiple maps simultaneously without having to resort to a hand-held device, with just a simple click. Ability to shift the selected map by moving the OFFSET (± 2°).\u003c\/p\u003e\n\u003cp text-align=\"justify\"\u003eThe inner rotor ignition systems designed by Malossi are based on the state-of-the-art technology applied to racing. Such a new system resulted from the need to overcome the technical limitations imposed by conventional flywheel ignition, which cannot ensure consistent performance over 10,000 rpm and causes severe setting-up problems for racing vehicles.\u003c\/p\u003e\n\u003cp text-align=\"justify\"\u003eWe made the control unit even more immune to interferences developing an uP STM8 - 8 bit microprocessor with processing speed of 20MIPS, guaranteeing spark timing with greater accuracy than prior versions!\u003c\/p\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eMHR Team II\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eincludes a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003enot adjustable with 3 trimmers\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003econtrol unit with variable spark advance timing:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ethe first trimmer (MAPS) is for selecting the spark advance timing map\u003c\/li\u003e\n\u003cli\u003ethe second trimmer (OFFSET) allows you to shift the selected map ± 2°\u003c\/li\u003e\n\u003cli\u003ethe third trimmer (LIM) used especially for 4-stroke engines, permits you to vary the rev limit between 11.500 RPM to 14.300 RPM and also allows you to disable the rev limiter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt also features\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e8 preset maps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003edescribed as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 variable spark advance maps for 4 stroke engines\u003c\/li\u003e\n\u003cli\u003e6 variable spark advance maps for 2 stroke engines\u003c\/li\u003e\n\u003cli\u003e1 fixed spark advance map\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp text-align=\"justify\"\u003eOther essential components have also been revised, such as the high voltage coil, now able to deliver a maximum discharge voltage \u0026gt;40 KV for normal engine speeds from \u0026gt;3000 RPM and an extraordinary ramp up time @10bar\u0026gt; 1750 V\/uS.\u003cbr\u003eOne of the most important novelties is the new rotor\/stator unit, featuring a completely redesigned static component in terms of mechanics and electronics!\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan color=\"#6a6a6a\" style=\"color: #6a6a6a;\"\u003eThe installation instructions graphically illustrate the best spark advance setup for different engines.\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp text-align=\"justify\"\u003e\u003cem\u003e\u003cstrong\u003eElectrical performance improved by 20%. Minimum start-up speed reduced from 450 rpm to 370 rpm.\u003cbr\u003eThe effects of this latest evolution translate into increased voltage supplied to the spark plug, at the same speed, which is anything but negligible compared to the previous model.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp align=\"center\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5 align=\"center\"\u003e\u003cstrong\u003eTech \u0026amp; Manual\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/storage.malossistore.com\/files\/montaggio\/pdm\/7318269.pdf\"\u003eDownload the Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCDI\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eControl unit with variable spark advance timing and with 3 trimmers:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003etrimmer MAPS: selects the spark advance timing map\u003c\/li\u003e\n\u003cli\u003etrimmer OFFSET: shifts the selected map ± 2°\u003c\/li\u003e\n\u003cli\u003etrimmer LIM: selects the rev limit (16 possible settings)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e8 preset maps:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 variable spark advance maps for 4 stroke engines\u003c\/li\u003e\n\u003cli\u003e6 variable spark advance maps for 2 stroke engines\u003c\/li\u003e\n\u003cli\u003e1 fixed spark advance map\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eSystem based on a uP STM8 - 8 bit microprocessor with a processing speed of 20MIPS (Million Instructions Per Second).\u003c\/li\u003e\n\u003cli\u003eReduced processing time, improved spark advance precision and stability.\u003c\/li\u003e\n\u003cli\u003eHardware architecture with improved immunity to interferences.\u003c\/li\u003e\n\u003cli\u003eTemperature class 105°C cable.\u003c\/li\u003e\n\u003cli\u003eCompensation for flywheel fitting error of ± 2° with 0.5° increments via an external trimmer\u003c\/li\u003e\n\u003cli\u003e8 spark advance tables selectable via an external trimmer\u003c\/li\u003e\n\u003cli\u003eVector spark advance tables comprised of 24 breakpoints with linear interpolation.\u003c\/li\u003e\n\u003cli\u003eAdjustable rev limit via an external trimmer with 16 settings.\u003c\/li\u003e\n\u003cli\u003eSoft cut feature insures a gradual rev limit cut-off.\u003c\/li\u003e\n\u003cli\u003e15 settings to adjust the rev limit between 11,500 RPM and 14,300 RPM with 200 RPM increments plus a setting to disable the rev limiter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp align=\"center\"\u003e \u003cimg src=\"http:\/\/storage.malossistore.com\/images\/imgsezionali\/mhr%20team_tabella001%20ok.jpg\" alt=\"MHRTEAM2\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh voltage coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum discharge voltage \u0026gt; 40 KV for engine speeds \u0026gt;3000 Rpm\u003c\/li\u003e\n\u003cli\u003eMaximum peak open-circuit voltage gap \u0026gt; 50KV\u003c\/li\u003e\n\u003cli\u003eRamp up time @10bar \u0026gt; 1750V\/uS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eRotor-stator unit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStator weight reduced by about 30% - total 100g.\u003c\/li\u003e\n\u003cli\u003eMonolithic high permeability magnetic circuit.\u003c\/li\u003e\n\u003cli\u003eOptimised magnetic path.\u003c\/li\u003e\n\u003cli\u003eStrengthening of the wound part, with cable in superior insulation class and increased wire diameter.\u003c\/li\u003e\n\u003cli\u003eElectrical performance improved by +20%.\u003c\/li\u003e\n\u003cli\u003eMinimum start-up speed reduced from 450 rpm to 370 rpm.\u003c\/li\u003e\n\u003cli\u003eMiniaturised impermeable connector with IP67 protection, with retention lock.\u003c\/li\u003e\n\u003cli\u003eAutomotive class cabling.\u003c\/li\u003e\n\u003cli\u003eRotor with permanent Neodymium magnets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e: with this kind of ignition the lighting set is disconnected.\u003ciframe width=\"1280\" height=\"720\" src=\"https:\/\/www.youtube.com\/embed\/dgYlhqBwGBs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"MALOSSI - SALE","offers":[{"title":"Default Title","offer_id":38187757731992,"sku":"5519630","price":574.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0044\/4933\/7437\/products\/5519630.png?v=1674315868"},{"product_id":"internal-rotor-ignition-polini-evolution-pvl-minarelli","title":"Polini PVL Ignition DRR - Apex","description":"\u003cp\u003ePolini presents the digital ignition kit for all the 50cc scooters equipped with liquid cooled Piaggio engines and liquid or air cooled Minarelli engines. The ignition kit includes: gear case support, stator and rotor, coil with CDI provided with the map of electronic advance ignition. The setup is very easy and it lets the advance to be mechanically adjusted. The new ignition with internal rotor with adjustable advance can be used on engines that reach 20.000 rpm. The Polini kit is the most advanced set of electronical technology designed and made for the races on track of the scooters equipped with w\/c Piaggio and Minarelli engines in the 70cc and 10cc classes. The electric system of the scooter is disabled. The kit includes a table with the list of the advance set-up. The power increase is granted at every rpm.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKIT INFO - ID # STAMPED ON PARTS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSTATOR #1042\u003c\/li\u003e\n\u003cli\u003eCDI\/COIL COMBO #500 123\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIGNITION TIMING STAGE6\/POLINI \u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e70cc  3.55 to 3.65mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e86cc   3.80 to 4.10mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e90cc   3.90 to 4.30mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e94cc   3.80 to 4.10mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e100cc 4.30 to 4.70mm\u003c\/span\u003e\u003c\/p\u003e","brand":"POLINI","offers":[{"title":"Default Title","offer_id":35942174687384,"sku":"171.0553","price":499.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0044\/4933\/7437\/products\/PVL-POLINI.jpg?v=1598368159"},{"product_id":"genuine-apex-oem-parts-kill-switch","title":"#6 Kill Switch Tether APEX - DRR","description":"\u003cp\u003eGenuine Apex OEM PARTS\u003c\/p\u003e","brand":"APEX OEM","offers":[{"title":"Default Title","offer_id":36954197360792,"sku":"A17517-AMCO-BK0","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0044\/4933\/7437\/files\/A17517-AMCO-BK0.png?v=1755720507"},{"product_id":"malossi-pvl-inner-rotor-ignition-mhr-ii-large-taper","title":"Malossi Inner Rotor Ignition - PVL (LARGE TAPER)","description":"\u003cp\u003e\u003cstrong\u003e**** REPLACES PART# 5518275 ****\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eManages multiple maps simultaneously without having to resort to a hand-held device, with just a simple click. Ability to shift the selected map by moving the OFFSET (± 2°).\u003c\/p\u003e\n\u003cp text-align=\"justify\"\u003eThe inner rotor ignition systems designed by Malossi are based on the state-of-the-art technology applied to racing. Such a new system resulted from the need to overcome the technical limitations imposed by conventional flywheel ignition, which cannot ensure consistent performance over 10,000 rpm and causes severe setting-up problems for racing vehicles.\u003c\/p\u003e\n\u003cp text-align=\"justify\"\u003eWe made the control unit even more immune to interferences developing an uP STM8 - 8 bit microprocessor with processing speed of 20MIPS, guaranteeing spark timing with greater accuracy than prior versions!\u003c\/p\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eMHR Team II\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eincludes a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003enot adjustable with 3 trimmers\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003econtrol unit with variable spark advance timing:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ethe first trimmer (MAPS) is for selecting the spark advance timing map\u003c\/li\u003e\n\u003cli\u003ethe second trimmer (OFFSET) allows you to shift the selected map ± 2°\u003c\/li\u003e\n\u003cli\u003ethe third trimmer (LIM) used especially for 4-stroke engines, permits you to vary the rev limit between 11.500 RPM to 14.300 RPM and also allows you to disable the rev limiter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt also features\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e8 preset maps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003edescribed as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 variable spark advance maps for 4 stroke engines\u003c\/li\u003e\n\u003cli\u003e6 variable spark advance maps for 2 stroke engines\u003c\/li\u003e\n\u003cli\u003e1 fixed spark advance map\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp text-align=\"justify\"\u003eOther essential components have also been revised, such as the high voltage coil, now able to deliver a maximum discharge voltage \u0026gt;40 KV for normal engine speeds from \u0026gt;3000 RPM and an extraordinary ramp up time @10bar\u0026gt; 1750 V\/uS.\u003cbr\u003eOne of the most important novelties is the new rotor\/stator unit, featuring a completely redesigned static component in terms of mechanics and electronics!\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan color=\"#6a6a6a\" style=\"color: #6a6a6a;\"\u003eThe installation instructions graphically illustrate the best spark advance setup for different engines.\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp text-align=\"justify\"\u003e\u003cem\u003e\u003cstrong\u003eElectrical performance improved by 20%. Minimum start-up speed reduced from 450 rpm to 370 rpm.\u003cbr\u003eThe effects of this latest evolution translate into increased voltage supplied to the spark plug, at the same speed, which is anything but negligible compared to the previous model.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp align=\"center\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5 align=\"center\"\u003e\u003cstrong\u003eTech \u0026amp; Manual\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/storage.malossistore.com\/files\/montaggio\/pdm\/7318269.pdf\"\u003eDownload the Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCDI\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eControl unit with variable spark advance timing and with 3 trimmers:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003etrimmer MAPS: selects the spark advance timing map\u003c\/li\u003e\n\u003cli\u003etrimmer OFFSET: shifts the selected map ± 2°\u003c\/li\u003e\n\u003cli\u003etrimmer LIM: selects the rev limit (16 possible settings)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e8 preset maps:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 variable spark advance maps for 4 stroke engines\u003c\/li\u003e\n\u003cli\u003e6 variable spark advance maps for 2 stroke engines\u003c\/li\u003e\n\u003cli\u003e1 fixed spark advance map\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eSystem based on a uP STM8 - 8 bit microprocessor with a processing speed of 20MIPS (Million Instructions Per Second).\u003c\/li\u003e\n\u003cli\u003eReduced processing time, improved spark advance precision and stability.\u003c\/li\u003e\n\u003cli\u003eHardware architecture with improved immunity to interferences.\u003c\/li\u003e\n\u003cli\u003eTemperature class 105°C cable.\u003c\/li\u003e\n\u003cli\u003eCompensation for flywheel fitting error of ± 2° with 0.5° increments via an external trimmer\u003c\/li\u003e\n\u003cli\u003e8 spark advance tables selectable via an external trimmer\u003c\/li\u003e\n\u003cli\u003eVector spark advance tables comprised of 24 breakpoints with linear interpolation.\u003c\/li\u003e\n\u003cli\u003eAdjustable rev limit via an external trimmer with 16 settings.\u003c\/li\u003e\n\u003cli\u003eSoft cut feature insures a gradual rev limit cut-off.\u003c\/li\u003e\n\u003cli\u003e15 settings to adjust the rev limit between 11,500 RPM and 14,300 RPM with 200 RPM increments plus a setting to disable the rev limiter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp align=\"center\"\u003e \u003cimg src=\"http:\/\/storage.malossistore.com\/images\/imgsezionali\/mhr%20team_tabella001%20ok.jpg\" alt=\"MHRTEAM2\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh voltage coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum discharge voltage \u0026gt; 40 KV for engine speeds \u0026gt;3000 Rpm\u003c\/li\u003e\n\u003cli\u003eMaximum peak open-circuit voltage gap \u0026gt; 50KV\u003c\/li\u003e\n\u003cli\u003eRamp up time @10bar \u0026gt; 1750V\/uS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eRotor-stator unit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStator weight reduced by about 30% - total 100g.\u003c\/li\u003e\n\u003cli\u003eMonolithic high permeability magnetic circuit.\u003c\/li\u003e\n\u003cli\u003eOptimised magnetic path.\u003c\/li\u003e\n\u003cli\u003eStrengthening of the wound part, with cable in superior insulation class and increased wire diameter.\u003c\/li\u003e\n\u003cli\u003eElectrical performance improved by +20%.\u003c\/li\u003e\n\u003cli\u003eMinimum start-up speed reduced from 450 rpm to 370 rpm.\u003c\/li\u003e\n\u003cli\u003eMiniaturised impermeable connector with IP67 protection, with retention lock.\u003c\/li\u003e\n\u003cli\u003eAutomotive class cabling.\u003c\/li\u003e\n\u003cli\u003eRotor with permanent Neodymium magnets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eWARNING\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e: with this kind of ignition the lighting set is disconnected.\u003ciframe width=\"1280\" height=\"720\" src=\"https:\/\/www.youtube.com\/embed\/dgYlhqBwGBs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"MALOSSI - SALE","offers":[{"title":"Default Title","offer_id":38187753570456,"sku":"5519633","price":574.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0044\/4933\/7437\/products\/5519630_0023f93e-1d18-4e79-bc84-1d212fdabac5.png?v=1674315997"},{"product_id":"27-5873","title":"MINI 4 TACHOMETER","description":"Mini4 tachometer uses a LCD screen powered by an inner CR 2032 changeable battery that allows installation on any vehicle.  With the small compact and user‑friendly size, it is perfect for many applications.  It also features backlight, RPM display warning, and max RPM tracking.\u003cul\u003e\u003cli\u003eDimensions:  W61.5mm x L33.7mm x H15.6mm\u003c\/li\u003e\u003c\/ul\u003e","brand":"KOSO","offers":[{"title":"Default Title","offer_id":41358704115864,"sku":"27-5873","price":94.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0044\/4933\/7437\/files\/3645-614897537055b.jpg?v=1768931866"},{"product_id":"malossi-spark-plug-cap-and-wire-kit","title":"Malossi Spark Plug Cap and Wire Kit","description":"\u003cp\u003e\u003cstrong\u003eResistor spark plug cap\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-quality resistor spark plug cap, which ensures constant resistance with minimal variations in overload conditions.\u003c\/li\u003e\n\u003cli\u003eExternal body made with a robust rubber structure featured by excellent resistance to intense heat and mechanical stress.\u003c\/li\u003e\n\u003cli\u003eSpecial rubber rings positioned internally and at the ends allowing to avoid external discharge even in conditions of high humidity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpark plug cable\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSilicone spark plug cable Ø7 mm with double insulation (EPDM inside and silicone outside).\u003c\/li\u003e\n\u003cli\u003eWide temperature range from -40° to +220°.\u003c\/li\u003e\n\u003cli\u003eFlexible and resistant.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MALOSSI - SALE","offers":[{"title":"Default Title","offer_id":42274867544216,"sku":"5519221","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0044\/4933\/7437\/products\/image_19d541d3-f025-4c19-a990-7b07e0c2371a.jpg?v=1695271665"},{"product_id":"malossi-spark-plug-cap-1","title":"Malossi Spark Plug Shielded Cap","description":"\u003cul\u003e\n\u003cli\u003eHigh-quality resistor spark plug cap, which ensures constant resistance with minimal variations in overload conditions.\u003c\/li\u003e\n\u003cli\u003eExternal body made with a robust rubber structure featured by excellent resistance to intense heat and mechanical stress.\u003c\/li\u003e\n\u003cli\u003eSpecial rubber rings positioned internally and at the ends allowing to avoid external discharge even in conditions of high humidity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MALOSSI - SALE","offers":[{"title":"Default Title","offer_id":42497506672792,"sku":"5519119B","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0044\/4933\/7437\/products\/5519119b_store.jpg?v=1695271665"},{"product_id":"polini-evolution-pvl-cdi-coil-combo","title":"Polini Evolution PVL CDI\/COIL Combo","description":"\u003cp\u003ePolini presents the digital ignition kit for all the 50cc scooters equipped with liquid cooled Piaggio engines and liquid or air cooled Minarelli engines. The ignition kit includes: gear case support, stator and rotor, coil with CDI provided with the map of electronic advance ignition. The setup is very easy and it lets the advance to be mechanically adjusted. The new ignition with internal rotor with adjustable advance can be used on engines that reach 20.000 rpm. The Polini kit is the most advanced set of electronical technology designed and made for the races on track of the scooters equipped with w\/c Piaggio and Minarelli engines in the 70cc and 10cc classes. The electric system of the scooter is disabled. The kit includes a table with the list of the advance set-up. The power increase is granted at every rpm.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKIT INFO - ID # STAMPED ON PARTS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSTATOR #1042\u003c\/li\u003e\n\u003cli\u003eCDI\/COIL COMBO #500 123\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIGNITION TIMING STAGE6\/POLINI \u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e70cc  3.55 to 3.65mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e86cc   3.80 to 4.10mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e90cc   3.90 to 4.30mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e94cc   3.80 to 4.10mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e100cc 4.30 to 4.70mm\u003c\/span\u003e\u003c\/p\u003e","brand":"POLINI","offers":[{"title":"Default Title","offer_id":42563601268888,"sku":"P171.0666","price":249.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0044\/4933\/7437\/products\/image_f26f1eeb-089b-4d68-ab02-ce25d8f6d24f.jpg?v=1695271835"},{"product_id":"inner-rotor-ignition-stage6-r-t-by-pvl-minarelli-mk2-small-taper","title":"INNER ROTOR PVL IGNITION STAGE6 R\/T - MKII (Small Taper)","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong style=\"background-color: #ffff00;\"\u003e**** YOU CAN USE THE IGNITION KIT WITHOUT THE PROGRAMMER ****\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe PVL internal rotor ignition from Stage6 R\/T got an upgrade! The new\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMK 2 internal rotor ignition from Stage6 R\/T for\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e50cc scooters with Minarelli engine\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003enow comes with a programmable CDI to give you the ability to adjust the ignition curve to match your engine setup and preferences.\u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003eOPTIONAL CDI IGNITION CURVE PROGRAMMING\u003c\/h2\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIf you don't want to (or can't) program the CDI - no problem! The included CDI is already preprogrammed with the latest MK2 ignition curves. This means that the ignition is plug \u0026amp; play without having to use the programming feature if you don't want to.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eOption 1\u003c\/strong\u003e: Do not connect green wire to ground: Less pre-ignition → track race\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eOption 2\u003c\/strong\u003e: Connect green wire to ground: More pre-ignition → drag race\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eOption 3\u003c\/strong\u003e: Program ignition curve yourself. To program the CDI you will need our special\u003cbr data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/www.gforcemx.com\/products\/programming-software-cdi-stage6-r-t-pvl-mk2\"\u003eProgramming software and interface Stage6 R\/T.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eSTAGE6 - PVL COOPERATION FOR MAXIMUM PERFORMANCE\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAs with the previous model, PVL provides the proven hardware, and Stage6 contributes the software, i.e. the two ignition curves, based on the experience of thousands of test bench runs and years on race tracks.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMust-have for racing scooters and tuning projects, so if it's all about getting maximum performance out of your 50cc scooter.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eTECHNICAL FEATURES\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDigital internal rotor ignition\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProgrammed advance for effective ignition timing up to 20,000 rpm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTwo preset ignition curves\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eCONTROL UNIT:\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDigital, controller-controlled ignition\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSmall, lightweight housing due to SMD technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eHIGH-VOLTAGE COIL:\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIgnition start already at less than 400 rpm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHighly effective capacitive discharge (CDI)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eConstant discharge voltage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eSTATOR-ROTOR UNIT:\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLightweight internal rotor\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLow rotational moment of inertia\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOvermolded generator winding on stator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNOTES AND RECOMMENDATIONS ON THE STAGE6 R\/T IGNITION:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eThe Stage6 R\/T MK2 is a race ignition,therefore there is\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eno supply for light \/ water pump\u003c\/strong\u003e. A\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ebattery\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eis\u003cspan data-mce-fragment=\"1\"\u003e needed to power the electrics\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\" data-pm-slice=\"1 1 []\"\u003eCannot be used in conjunction with Malossi MHR Team crankshafts.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWe recommend using a\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eracing spark plug\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eand\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eignition breaker.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAbsolutely make sure that there is a ground wire between engine case and chassis!\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STAGE6 - SALE","offers":[{"title":"Default Title","offer_id":42802211029144,"sku":"S6-4516601","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0044\/4933\/7437\/files\/585272_4923338.jpg?v=1695271610"},{"product_id":"pvl-install-kit-a","title":"PVL INSTALL KIT","description":"\u003cp\u003eKit Includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDial Indicator w\/Threaded Adaptor\u003c\/li\u003e\n\u003cli\u003ePVL Rotor Puller\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KIT","offers":[{"title":"Default Title","offer_id":42808573591704,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0044\/4933\/7437\/files\/PVL-KIT-A.png?v=1752255656"},{"product_id":"copy-stage6-mk2-programmable-pvl-ignition-cdi-programmer-combo","title":"STAGE6 MK2 PROGRAMMABLE PVL IGNITION + CDI PROGRAMMER COMBO","description":"\u003cp\u003eThe PVL internal rotor ignition from Stage6 R\/T got an upgrade! The new \u003cstrong\u003eMK 2 internal rotor ignition from Stage6 R\/T for\u003c\/strong\u003e \u003cstrong\u003e50cc scooters with Minarelli engine\u003c\/strong\u003e now comes with a programmable CDI to give you the ability to adjust the ignition curve to match your engine setup and preferences.\u003c\/p\u003e\n\u003ch2\u003eOPTIONAL CDI IGNITION CURVE PROGRAMMING\u003c\/h2\u003e\n\u003cp\u003eIf you don't want to (or can't) program the CDI - no problem! The included CDI is already preprogrammed with the latest MK2 ignition curves. This means that the ignition is plug \u0026amp; play without having to use the programming feature if you don't want to.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 1\u003c\/strong\u003e: Do not connect green wire to ground: Less pre-ignition → track race\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 2\u003c\/strong\u003e: Connect green wire to ground: More pre-ignition → drag race\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 3\u003c\/strong\u003e: Program ignition curve yourself. To program the CDI you will need our special\u003cbr\u003e\u003ca href=\"https:\/\/www.gforcemx.com\/products\/programming-software-cdi-stage6-r-t-pvl-mk2\"\u003eProgramming software and interface Stage6 R\/T.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAnd if you want even more power, you can also add a flywheel to the ignition rotor. This modification increases the inertia at high rpm.\u003c\/p\u003e\n\u003ch3\u003eSTAGE6 - PVL COOPERATION FOR MAXIMUM PERFORMANCE\u003c\/h3\u003e\n\u003cp\u003eAs with the previous model, PVL provides the proven hardware, and Stage6 contributes the software, i.e. the two ignition curves, based on the experience of thousands of test bench runs and years on race tracks.\u003c\/p\u003e\n\u003cp\u003eMust-have for racing scooters and tuning projects, so if it's all about getting maximum performance out of your 50cc scooter.\u003c\/p\u003e\n\u003ch3\u003eTECHNICAL FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eDigital internal rotor ignition\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eProgrammed advance for effective ignition timing up to 20,000 rpm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTwo preset ignition curves\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCONTROL UNIT:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDigital, controller-controlled ignition\u003c\/li\u003e\n\u003cli\u003eSmall, lightweight housing due to SMD technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eHIGH-VOLTAGE COIL:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eIgnition start already at less than 400 rpm\u003c\/li\u003e\n\u003cli\u003eHighly effective capacitive discharge (CDI)\u003c\/li\u003e\n\u003cli\u003eConstant discharge voltage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSTATOR-ROTOR UNIT:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight internal rotor\u003c\/li\u003e\n\u003cli\u003eLow rotational moment of inertia\u003c\/li\u003e\n\u003cli\u003eOvermolded generator winding on stator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eNOTES AND RECOMMENDATIONS ON THE STAGE6 R\/T IGNITION:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe Stage6 R\/T MK2 is a race ignition,therefore there is \u003cstrong\u003eno supply for light \/ water pump\u003c\/strong\u003e. A battery is needed to power the electrics\u003c\/li\u003e\n\u003cli\u003eWe recommend using a racing spark plug and ignition breaker.\u003c\/li\u003e\n\u003cli\u003eAbsolutely make sure that there is a ground wire between engine case and chassis!\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STAGE6","offers":[{"title":"Default Title","offer_id":46941856825496,"sku":"S6-4516601\/KR","price":629.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0044\/4933\/7437\/products\/cc2e282e2bcf5a26f51c3e79a728763a_412c3844-2c68-46a8-aa19-c4ec944a19cd.jpg?v=1693932242"},{"product_id":"spark-plug-cap-and-wire-stage6-multiple-colors","title":"Spark Plug Cap and Wire - Stage6 - BLUE","description":"\u003cdiv aria-expanded=\"true\" data-wrapper=\"true\"\u003e\n\u003cdiv class=\"pvd_pc__accordion_content uk-accordion-content uk-active\"\u003e\n\u003cdiv data-b=\"beschreibung\"\u003e\n\u003ch2\u003eStage6 ignition cable with Spark plug connector\u003c\/h2\u003e\n\u003cp\u003eFor scooters, motorcycles, mopeds, and more: High-quality HT ignition cable with spark plug cap from Stage6. The colored silicone coating with the Stage6 logo adds stylish accents and makes it a real eye-catcher.\u003c\/p\u003e\n\u003ch3\u003eFeatures Stage6 spark plug cap \u0026amp; cable set\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIgnition cable\u003c\/strong\u003e: The 50 cm cable is coated with insulating silicone rubber and features a fiber braid that prevents arcing, even in damp conditions. The outer layer is made of water- and moisture-resistant colored silicone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpark plug connector\u003c\/strong\u003e: The 90° spark plug connector is also insulated and provides reliable protection against moisture. It has a ceramic resistance of approximately 5000 Ohms, preventing internal overvoltage and maintaining stable resistance under overload situations.\u003c\/p\u003e\n\u003cp\u003eWhile you're at it - it's a good idea to get a new\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.scooter-attack.com\/en\/ignition\/spark-plugs\/?air_filter_family=spark-plug\"\u003espark plug\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eas well.\u003c\/p\u003e\n\u003ch3\u003eTechnical data Stage6 spark plug connector with cable:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCable length: 50 cm\u003c\/li\u003e\n\u003cli\u003eIgnition cable diameter: 8 mm\u003c\/li\u003e\n\u003cli\u003ePlug: 90°\u003c\/li\u003e\n\u003cli\u003eResistance: 5000 Ohm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv aria-expanded=\"false\" data-wrapper=\"true\"\u003e\n\u003cdiv class=\"pvd_pc__accordion_content uk-accordion-content pvd_pi\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"STAGE6","offers":[{"title":"Default Title","offer_id":47406550352024,"sku":"S6-4510001\/BL","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0044\/4933\/7437\/files\/674502_6200337.jpg?v=1762181088"},{"product_id":"spark-plug-cap-and-wire-stage6-red","title":"Spark Plug Cap and Wire - Stage6 - RED","description":"\u003cdiv aria-expanded=\"true\" data-wrapper=\"true\"\u003e\n\u003cdiv class=\"pvd_pc__accordion_content uk-accordion-content uk-active\"\u003e\n\u003cdiv data-b=\"beschreibung\"\u003e\n\u003ch2\u003eStage6 ignition cable with Spark plug connector\u003c\/h2\u003e\n\u003cp\u003eFor scooters, motorcycles, mopeds, and more: High-quality HT ignition cable with spark plug cap from Stage6. The colored silicone coating with the Stage6 logo adds stylish accents and makes it a real eye-catcher.\u003c\/p\u003e\n\u003ch3\u003eFeatures Stage6 spark plug cap \u0026amp; cable set\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIgnition cable\u003c\/strong\u003e: The 50 cm cable is coated with insulating silicone rubber and features a fiber braid that prevents arcing, even in damp conditions. The outer layer is made of water- and moisture-resistant colored silicone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpark plug connector\u003c\/strong\u003e: The 90° spark plug connector is also insulated and provides reliable protection against moisture. It has a ceramic resistance of approximately 5000 Ohms, preventing internal overvoltage and maintaining stable resistance under overload situations.\u003c\/p\u003e\n\u003cp\u003eWhile you're at it - it's a good idea to get a new\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.scooter-attack.com\/en\/ignition\/spark-plugs\/?air_filter_family=spark-plug\"\u003espark plug\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eas well.\u003c\/p\u003e\n\u003ch3\u003eTechnical data Stage6 spark plug connector with cable:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCable length: 50 cm\u003c\/li\u003e\n\u003cli\u003eIgnition cable diameter: 8 mm\u003c\/li\u003e\n\u003cli\u003ePlug: 90°\u003c\/li\u003e\n\u003cli\u003eResistance: 5000 Ohm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv aria-expanded=\"false\" data-wrapper=\"true\"\u003e\n\u003cdiv class=\"pvd_pc__accordion_content uk-accordion-content pvd_pi\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"STAGE6","offers":[{"title":"Default Title","offer_id":47406574370968,"sku":"S6-4510001\/RD","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0044\/4933\/7437\/files\/674538_6200457.jpg?v=1762181205"},{"product_id":"spark-plug-cap-and-wire-stage6-orange","title":"Spark Plug Cap and Wire - Stage6 - ORANGE","description":"\u003cdiv data-wrapper=\"true\" aria-expanded=\"true\"\u003e\n\u003cdiv class=\"pvd_pc__accordion_content uk-accordion-content uk-active\"\u003e\n\u003cdiv data-b=\"beschreibung\"\u003e\n\u003ch2\u003eStage6 ignition cable with Spark plug connector\u003c\/h2\u003e\n\u003cp\u003eFor scooters, motorcycles, mopeds, and more: High-quality HT ignition cable with spark plug cap from Stage6. The colored silicone coating with the Stage6 logo adds stylish accents and makes it a real eye-catcher.\u003c\/p\u003e\n\u003ch3\u003eFeatures Stage6 spark plug cap \u0026amp; cable set\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIgnition cable\u003c\/strong\u003e: The 50 cm cable is coated with insulating silicone rubber and features a fiber braid that prevents arcing, even in damp conditions. The outer layer is made of water- and moisture-resistant colored silicone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpark plug connector\u003c\/strong\u003e: The 90° spark plug connector is also insulated and provides reliable protection against moisture. It has a ceramic resistance of approximately 5000 Ohms, preventing internal overvoltage and maintaining stable resistance under overload situations.\u003c\/p\u003e\n\u003cp\u003eWhile you're at it - it's a good idea to get a new\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.scooter-attack.com\/en\/ignition\/spark-plugs\/?air_filter_family=spark-plug\"\u003espark plug\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eas well.\u003c\/p\u003e\n\u003ch3\u003eTechnical data Stage6 spark plug connector with cable:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCable length: 50 cm\u003c\/li\u003e\n\u003cli\u003eIgnition cable diameter: 8 mm\u003c\/li\u003e\n\u003cli\u003ePlug: 90°\u003c\/li\u003e\n\u003cli\u003eResistance: 5000 Ohm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-wrapper=\"true\" aria-expanded=\"false\"\u003e\n\u003cdiv class=\"pvd_pc__accordion_content uk-accordion-content pvd_pi\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"STAGE6","offers":[{"title":"Default Title","offer_id":47406575452312,"sku":"S6-4510001\/OR","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0044\/4933\/7437\/files\/674526_6200223.jpg?v=1762181259"},{"product_id":"spark-plug-cap-and-wire-stage6-yellow","title":"Spark Plug Cap and Wire - Stage6 - YELLOW","description":"\u003cdiv data-wrapper=\"true\" aria-expanded=\"true\"\u003e\n\u003cdiv class=\"pvd_pc__accordion_content uk-accordion-content uk-active\"\u003e\n\u003cdiv data-b=\"beschreibung\"\u003e\n\u003ch2\u003eStage6 ignition cable with Spark plug connector\u003c\/h2\u003e\n\u003cp\u003eFor scooters, motorcycles, mopeds, and more: High-quality HT ignition cable with spark plug cap from Stage6. The colored silicone coating with the Stage6 logo adds stylish accents and makes it a real eye-catcher.\u003c\/p\u003e\n\u003ch3\u003eFeatures Stage6 spark plug cap \u0026amp; cable set\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIgnition cable\u003c\/strong\u003e: The 50 cm cable is coated with insulating silicone rubber and features a fiber braid that prevents arcing, even in damp conditions. The outer layer is made of water- and moisture-resistant colored silicone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpark plug connector\u003c\/strong\u003e: The 90° spark plug connector is also insulated and provides reliable protection against moisture. It has a ceramic resistance of approximately 5000 Ohms, preventing internal overvoltage and maintaining stable resistance under overload situations.\u003c\/p\u003e\n\u003cp\u003eWhile you're at it - it's a good idea to get a new\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.scooter-attack.com\/en\/ignition\/spark-plugs\/?air_filter_family=spark-plug\"\u003espark plug\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eas well.\u003c\/p\u003e\n\u003ch3\u003eTechnical data Stage6 spark plug connector with cable:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCable length: 50 cm\u003c\/li\u003e\n\u003cli\u003eIgnition cable diameter: 8 mm\u003c\/li\u003e\n\u003cli\u003ePlug: 90°\u003c\/li\u003e\n\u003cli\u003eResistance: 5000 Ohm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-wrapper=\"true\" aria-expanded=\"false\"\u003e\n\u003cdiv class=\"pvd_pc__accordion_content uk-accordion-content pvd_pi\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"STAGE6","offers":[{"title":"Default Title","offer_id":47406576664728,"sku":"S6-4510001\/YE","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0044\/4933\/7437\/files\/674550_6200016.jpg?v=1762181303"},{"product_id":"spark-plug-cap-and-wire-stage6-green","title":"Spark Plug Cap and Wire - Stage6 - GREEN","description":"\u003cdiv data-wrapper=\"true\" aria-expanded=\"true\"\u003e\n\u003cdiv class=\"pvd_pc__accordion_content uk-accordion-content uk-active\"\u003e\n\u003cdiv data-b=\"beschreibung\"\u003e\n\u003ch2\u003eStage6 ignition cable with Spark plug connector\u003c\/h2\u003e\n\u003cp\u003eFor scooters, motorcycles, mopeds, and more: High-quality HT ignition cable with spark plug cap from Stage6. The colored silicone coating with the Stage6 logo adds stylish accents and makes it a real eye-catcher.\u003c\/p\u003e\n\u003ch3\u003eFeatures Stage6 spark plug cap \u0026amp; cable set\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIgnition cable\u003c\/strong\u003e: The 50 cm cable is coated with insulating silicone rubber and features a fiber braid that prevents arcing, even in damp conditions. The outer layer is made of water- and moisture-resistant colored silicone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpark plug connector\u003c\/strong\u003e: The 90° spark plug connector is also insulated and provides reliable protection against moisture. It has a ceramic resistance of approximately 5000 Ohms, preventing internal overvoltage and maintaining stable resistance under overload situations.\u003c\/p\u003e\n\u003cp\u003eWhile you're at it - it's a good idea to get a new\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.scooter-attack.com\/en\/ignition\/spark-plugs\/?air_filter_family=spark-plug\"\u003espark plug\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eas well.\u003c\/p\u003e\n\u003ch3\u003eTechnical data Stage6 spark plug connector with cable:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCable length: 50 cm\u003c\/li\u003e\n\u003cli\u003eIgnition cable diameter: 8 mm\u003c\/li\u003e\n\u003cli\u003ePlug: 90°\u003c\/li\u003e\n\u003cli\u003eResistance: 5000 Ohm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-wrapper=\"true\" aria-expanded=\"false\"\u003e\n\u003cdiv class=\"pvd_pc__accordion_content uk-accordion-content pvd_pi\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"STAGE6","offers":[{"title":"Default Title","offer_id":47406577352856,"sku":"S6-4510001\/GR","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0044\/4933\/7437\/files\/674514_6200280.jpg?v=1762181350"},{"product_id":"spark-plug-cap-and-wire-stage6-black","title":"Spark Plug Cap and Wire - Stage6 - BLACK","description":"\u003cdiv data-wrapper=\"true\" aria-expanded=\"true\"\u003e\n\u003cdiv class=\"pvd_pc__accordion_content uk-accordion-content uk-active\"\u003e\n\u003cdiv data-b=\"beschreibung\"\u003e\n\u003ch2\u003eStage6 ignition cable with Spark plug connector\u003c\/h2\u003e\n\u003cp\u003eFor scooters, motorcycles, mopeds, and more: High-quality HT ignition cable with spark plug cap from Stage6. The colored silicone coating with the Stage6 logo adds stylish accents and makes it a real eye-catcher.\u003c\/p\u003e\n\u003ch3\u003eFeatures Stage6 spark plug cap \u0026amp; cable set\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIgnition cable\u003c\/strong\u003e: The 50 cm cable is coated with insulating silicone rubber and features a fiber braid that prevents arcing, even in damp conditions. The outer layer is made of water- and moisture-resistant colored silicone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpark plug connector\u003c\/strong\u003e: The 90° spark plug connector is also insulated and provides reliable protection against moisture. It has a ceramic resistance of approximately 5000 Ohms, preventing internal overvoltage and maintaining stable resistance under overload situations.\u003c\/p\u003e\n\u003cp\u003eWhile you're at it - it's a good idea to get a new\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.scooter-attack.com\/en\/ignition\/spark-plugs\/?air_filter_family=spark-plug\"\u003espark plug\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eas well.\u003c\/p\u003e\n\u003ch3\u003eTechnical data Stage6 spark plug connector with cable:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCable length: 50 cm\u003c\/li\u003e\n\u003cli\u003eIgnition cable diameter: 8 mm\u003c\/li\u003e\n\u003cli\u003ePlug: 90°\u003c\/li\u003e\n\u003cli\u003eResistance: 5000 Ohm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-wrapper=\"true\" aria-expanded=\"false\"\u003e\n\u003cdiv class=\"pvd_pc__accordion_content uk-accordion-content pvd_pi\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"STAGE6","offers":[{"title":"Default Title","offer_id":47406578663576,"sku":"S6-4510001\/BK","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0044\/4933\/7437\/files\/674490_6200106.jpg?v=1762181408"}],"url":"https:\/\/www.gforcemx.com\/collections\/drr-apex-ignition.oembed","provider":" G-FORCE POWERSPORTS","version":"1.0","type":"link"}